During electric heating construction, is it necessary to test the electric heating tape?
Thread Content
During electric heating construction, is it necessary to test the electric heating tape?
I don't have much field experience. But it should be tested with your eyes closed. Testing does not need to be troublesome after all, but it can avoid many problems. . It would be troublesome if something went wrong, let alone electric heating. There are so many steps to protect and prevent corrosion later. Therefore, it is not only necessary to test, but also after the electric tape is installed, it must be inspected and accepted before anti-corrosion and heat preservation are allowed~! ~!
Do an insulation test before winding. The purpose is to test whether the electric tape itself meets the requirements. An insulation test should also be performed before powering on to prevent damage to the electric tape during installation or insulation. It is still very beneficial to do it, so don't be afraid of trouble.
It must be tested, otherwise how dare you send power. During on-site installation, the most important thing is to select heating cables of different powers according to the design, and shake the insulation before sending power. As for other indicators such as calorific value, it is difficult to test on site.
Testing is required, as are safety and installation requirements
Testing is necessary. Test before installation, and if there are no problems after installation, you can continue with the next step of work such as insulation.