Air compressor oil cooling effect is poor.
Thread Content
The oil cooler of the water-cooled air compressor is dirty and has a long-term high temperature alarm. Since the diameter of the water side of the cooler is only 7MM, such a small brush cannot be found. Manual cleaning is always incomplete, and cleaning with acid has not achieved the expected results. Can any master please help share some good experience...Thank you!
You can use high-pressure water to clean it, which will clean it more thoroughly. You can give it a try.
With copper, there is much less scaling.
Chemical cleaning can solve the problem, but you can't just use acid. You have to prepare a cleaning agent according to the composition of the dirt. We specialize in cleaning, you can send messages to communicate in detail.
You can clean it with high-pressure water and add some cleaning agent. The cleaning will be more thorough. You can try it. Made of copper, much better!
Use low-pressure steam to rinse, then rinse with high-pressure water, the effect is good
It's definitely scaled, can it be dismantled? Most of the components of scale are calcium and magnesium ions. Cleaning must be targeted. Mechanical cleaning is also good. Try it first to see the effect. Then determine the next step of chemical cleaning or other methods.