HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

This is what the oven is all about

2009-04-19View Original

Thread Content

I'm so nervous, why don't I just get a dryer over there to heat the stove! Don't worry about our appearance!
Reply #22009-04-19
During the operation of the furnace body, the materials in the furnace have strong wear and erosion on the relevant surfaces in the furnace, so there are high requirements for the performance of the wear-resistant refractory materials on the inner surface. The purpose of the oven is to control the slow evaporation of moisture in the furnace lining and prevent damage due to rapid evaporation. At the same time, the refractory and wear-resistant materials can be expanded evenly, slowly and fully to avoid damage to the furnace wall caused by thermal stress concentration or lattice transformation, and the heat preservation pouring part of the entire furnace is heated and dried through the oven. Make the furnace wall reach the state required for the normal operation of the furnace body. Therefore, the oven is a very important and strict step in the installation process. The main reference for the oven is the temperature ~ and there are some other instrument parameters ~ Do you think it has something to do with the instrument?
Reply #32009-04-19
If the alumina production is out of service for a long time, the roasting furnace needs to be baked before it is put into operation. The baking time is shorter than the first time the furnace is fired. Each time the oven is fired, the auxiliary combustion station must be clicked. Our computer and instrumentation are the most nervous. There is no way. If the auxiliary combustion station cannot be turned on, if the reason cannot be found, we will be asked to investigate. If we cannot find out, it is our problem·~~· The most recent oven failed to light up when I lit the combustion station. Finally, it was discovered that the air pressure of the instrument was low, and the chain protection was automatically triggered when the oven was lit~~· If there was a problem, the process and leaders would not say that it was the responsibility of the computer or the instrument, but would only say that it was the responsibility of your workshop~! So work is no small matter, be careful...~··············You will definitely learn something that others cannot.~
Reply #42009-04-20
The above explains the meaning of oven, I agree.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.