Selection of synthesis tower and internal component structure?
Thread Content
We are planning to modify the synthesis tower, and we hope experts will share their opinions actively
What kind of synthesis tower—ammonia, urea, or methanol? Status of the old synthesis tower----design parameters, manufacturer, what issues need to be addressed? Direction of the transformation—areas for improvement, expected outcomes, etc. How can I help you with a post that contains nothing?
Tianjin Chuangju has extensive experience in transforming towers; you can get in touch with them
Tianjin Chuangju has extensive experience in transforming towers; you can get in touch with them
We currently have one 800-ton synthesis tower and one 600-ton synthesis tower, with an annual production capacity of 50,000 tons of synthetic ammonia; we plan to increase this capacity to 100,000 tons by removing the existing two towers. Would it be appropriate to install a new 1,400-ton synthesis tower, or is a 1,200-ton tower a better choice? Which type of internal structure for synthesis towers is currently the most advanced?
An internal component for a direct heat-exchange type synthesis tower, suitable for catalytic synthesis reactions of ammonia or methanol; it consists of two or more layers of catalytic beds (12) at the upper part, with a heat exchanger (38) in the lower part. Its characteristic is that the diameter of this internal component ranges from 0.4 to 1.5 meters, and the appropriate pressure range is 200 to 300 bars. Catalysts are supported between the catalytic beds by cold and hot gas mixers, which also serve to separate the two catalytic beds; these mixers are directly welded to the wall of the internal component.
Could someone from HAIYOU on the 6th floor tell me which company manufactures the internal components of the direct heat exchange type synthesis tower? What are their specifications and models? Thank you
Our factory uses the JR-type reactor internals from Shijiazhuang Zhengyuan Company, and they perform very well! You can ask around
What kind of synthesis tower—ammonia, urea, or methanol? Status of the old synthesis tower----design parameters, manufacturer, what issues need to be addressed? Direction of the transformation—areas for improvement, expected outcomes, etc. How can I help you with a post that contains nothing? Different products, different towers?