How to install a sampling valve to achieve energy conservation and environmental protection
Thread Content
In production, analysts always release a large amount of material when taking samples, which is only then placed into the sampling cup; this is quite wasteful and also causes pollution to the environment. Please discuss: How can sampling valves be installed at the pump outlet or on the main material pipeline in order to meet sampling requirements while also being energy-efficient and environmentally friendly?
Basic sampling procedure: First, circulate the material from the pump outlet to the pump inlet to remove stagnant samples, and then take the samples. Finished product samplers are available for purchase; give them a look.
Could you explain it? Can the finished product sampler return the \"dead samples\" back to the system naturally?
We have a wastewater sampling point that was designed improperly; sometimes it’s even impossible to reach it for sampling
Just install a sampling valve and a recovery device on the pipeline
Could we make the sampling pipeline smaller? That way, although some fluid still needs to be drained, less will be wasted, right?:)
A dedicated sampler is installed, allowing for direct sampling
When analyzing permutations, it is possible to recycle those that are to be removed; as long as they are not discharged into sewers, there are no environmental issues
⒈A sampling circulation material line is added from the pump outlet to the pump inlet; sampling is performed after removing the stagnant sample； ⒉Install sampling valves on the pipelines and appropriately enhance the sample recovery system.
For gases or volatile liquids, the sampling pipeline can be directly connected to the sample inlet of the analyzer; for liquids, a recovery device can be added
For chemical materials, sampling involves first transferring a certain amount of the material into a designated container before taking a sample. When there is a sufficient quantity of material in that container, it is pumped into the system using a mobile pump, thereby avoiding any waste.