What is a good cleaning agent for cleaning equipment parts?
Thread Content
After disassembling the equipment, the oil residue on the parts needs to be cleaned. What do people usually use for cleaning, and what gives the best results for a clean finish?
It can be wiped with kerosene. Those with high requirements should use specialized equipment cleaners. It can also be cleaned using an ultrasonic cleaner.
Kerosene is generally used; sometimes propane or methane is used, with the latter two being toxic
Kerosene and metal cleaner (very cheap, it works great for removing oil from our hands)
Kerosene: Safe and reliable; be careful to prevent fires
We use kerosene, but its effect is not as good as that of gasoline; tetrahydrocarbon is also good, but it’s unfortunately toxic.
We all use kerosene; actually, diesel can also be used
We use kerosene; gasoline is even better, though it’s a bit more expensive! ! !
For small parts, kerosene, gasoline, or metal cleaning agents will all work. It’s best not to use toxic substances. A large number of components are generally cleaned using machines. Cleaning machines come in belt type, rotary type, ultrasonic type, and so on.
Metal cleaners are being used now. It has a good effect, is non-toxic, and not flammable