Which standard should be used when selecting safety valves or rupture discs for the design of pressure vessels?
Thread Content
This post was last edited by Lan Meng on 2009-6-4 13:50. There are too many standards for safety valve rupture discs. It’s also unclear which standard is usually chosen. **Are there mandatory standards for selecting safety valves for containers?
This post was last edited by JFTANG726 on 2009-6-11 at 16:14. Safety valves shall comply with the provisions of TSG ZF001 \"Regulations on Safety Technical Supervision of Safety Valves\". According to the 1999 edition of the Pressure Vessel Regulations, Article 159 states that rupture disc devices must meet the requirements of GB567 \"Rupture Discs and Rupture Disc Devices\".
Appendix B of GB150, Attachment 5 of the tolerance specifications
First, determine whether a safety valve is necessary based on the capacity specifications and the value of 150; if one is needed, contact the manufacturer directly, and they will handle everything that follows (including the calculations, etc.).
How to draw safety valve rupture discs in a PID diagram? Please advise.