Sea friends, what is the highest yield of crude benzene you have achieved?
Thread Content
As the title suggests, let me say that the highest value in my factory is 1.05
Our factory’s model 1.05–1.2 does not come with a reducer. It’s that the pipes and equipment are severely corroded. Sometimes it can be GAMEOVER in as little as half a month. Hehe.
Our low is over 0.8!
The plant control index is 0.97; in summer it’s around 0.95, while in winter it can reach up to 1.01 at times
This post was last edited by gxz on 2009-6-7 21:31. Last month’s yield of crude benzene from the distillation process was 1.17, while the target value was 1.05; the average boiling range was 95.42
5# gxz is so good; it must be produced using two benzene towers, right? That one is light benzene
5# gxz, what’s the temperature at the top of your tower? Oil-rich temperature? Drain the slag? How is the quality of the cleaning oil?
I’m working in coking, but our plant’s recycling starts in summer. 04, winter is at 1. 15. With a zoom reducer.
If a 7.63-meter coke oven is used, the recovery rate of crude benzene will decrease due to the high temperature in the oven roof area