Height-to-diameter ratio of the tower
Thread Content
I designed a distillation tower that is 16 meters high and has a diameter of 0.4 meters. What impact does a height-to-diameter ratio of over 30 have on a distillation tower? Are any reinforcement measures required? Thank you all for your replies!
If you place the tower inside the frame, there will be no issue with safety. It is recommended to use a 3–4 layer framework.
If it can be placed within a frame, that’s of course ideal; if not, use a conical skirt, as long as the calculations show it will work!
The height-to-diameter ratio is related to the material composition and separation efficiency
Given the wind and seismic loads, towers with such a high slenderness ratio should be placed indoors, or connected to adjacent buildings via a connection platform for reinforcement
Consider the tower module in SW-6; it’s fine as long as the verification is successful, but the selection needs to be reasonable
It is determined in accordance with the design standards of the tower, taking into account the internal separation efficiency of the material within the tower. It needs to be calculated.
The size of the tower is calculated based on the requirements of the process. The mechanical design of the tower is carried out to meet the process requirements.
If you want reliability, build a frame with 3 to 4 layers; if you want things to be simpler, use a conical base. But all the mechanical calculations need to be done properly
Could you all please explain in detail the design criteria for the height-to-diameter ratio?