Seek pressure testing plan for high-pressure chemical equipment
Thread Content
This post was last edited by lyh2008ok on 2009-7-16 21:55. I urgently need a pressure testing plan for high-pressure chemical equipment (1000L stainless steel reactor with storage tank and corresponding stainless steel pipes). The pressure testing medium cannot be water; only air compressors and nitrogen can be used, with a testing pressure of 2.5 MPa. Thank you! The proposal is preferably in WORD format.
I’m stunned; pressure testing is something that can be solved easily. Of course, you use compressed air for reactors, as nitrogen is expensive. Generally, heat exchangers are pressure-tested with water. Once the pipeline setup is complete, inject compressed air at 2.5 MP and check for leaks, until the system can maintain its pressure (with no significant drop over 1-2 hours)