I would like to ask about three-phase separators
Thread Content
In the design of a three-phase separator, the gas phase volume should be related to the volume fraction of the gas phase in the mixed feed. As for how exactly this should be taken into account, what percentage is generally reserved?
For medium separation with more gas and less liquid, the liquid level is generally set at half of the cylinder height. For conditions with more oil and less gas, the gas-phase flow area can be slightly reduced, which means the liquid level can be slightly higher.
The design of a three-phase separator involves determining its dimensions, primarily the diameter of the separator, as well as the heights of the gas phase, oil phase, and water phase. These dimensions need to be calculated to determine; they are related to factors such as the density of the logistics, the flow rate of the gas, and the settling speed of the droplets. The separator mainly consists of a separation zone, a gas phase zone, a liquid phase zone, a demisting zone, and an oil collection zone. The specific calculations and related parameters are clearly specified in the SY-T0515-1997 standard for oil-gas separation.