Seeking help with drawing
Thread Content
When drawing, the center line is set as a dotted line, but it appears as a solid line; I adjusted the global scale factor in the formatting options, yet it remains a solid line (the line style was also adjusted)
The scale factor still isn’t set correctly. How long a line do you draw?
Yes, your scale factor is too high. MO, choose that line and make some adjustments. Some small images can be 0.X
Do not adjust the global scale factor casually; you can adjust the line style scale of this specific line separately. If the amount is small: press Ctrl+1 and change it in the properties. If you make many modifications: use my program: http://bbs.hcbbs.com/thread-418017-1-1.html to adjust the line scale on the layers
Is it related to the CAD virus? The points don’t appear when drawing, and they still don’t show up even after making adjustments
It is likely due to improper settings or the wrong selection. 1# Snow is flying
First, check whether you have chosen the correct line style, and then see if your scale factor is set too high. Striving to be low-key should be no problem.
Increase the proportion in the settings and give it a try
Adjusting the ratio in the properties doesn’t work; adjusting it in the line style also doesn’t help
Adjust the scale factor, trying to make it as small as possible. If there is still no change after making this adjustment, regenerate it to see if that helps.