Does the workshop layout meet the requirements of building codes?
Thread Content
The workshop has 10 storage tanks with a capacity of 25 cubic meters each; two of these tanks hold raw materials, while the others contain recycled materials from the workshop, such as methanol or benzene! According to building codes, if these storage tanks are to be used as a tank farm, 25 meters are required. Or if these storage tanks are used as auxiliary equipment in the workshop, then no spacing requirements are needed! May I ask how everyone plans to handle these storage tanks?
For substances such as methanol and benzene, it is best to arrange them in accordance with the requirements of GB50160-2008. When the total volume of flammable liquids is no more than 1,000 cubic units, it can be installed within the device.
The storage of methanol and benzene requires certain safety hardware measures as well as emergency plans.
Second floor: There is methanol, benzene, etc.; it is best to arrange them in accordance with the requirements of GB50160-2008. When the total volume of flammable liquids is no more than 1,000 cubic units, it can be installed within the device. In GB50160-2008, which provision states that combustible liquids with a total volume of no more than 1000 cubic meters can be installed within the facility? "?
In the building codes, which provision states that \"combustible liquids with a total volume of no more than 1,000 cubic feet can be installed within the facility.\" \"?\"
In GB50160-2008, which provision states that combustible liquids with a total volume of no more than 1000 cubic meters can be installed within the facility? "?
Containers in the workshop can be used as intermediate tanks only if they contain a quantity sufficient for use within 24 hours; otherwise, they must be classified as storage tanks and cannot be placed inside the workshop.