After 40 kilograms of gasification, can the high-flash gas be sent to the stripping tower after passing through the graywater heat exchanger?
Thread Content
This post was last edited by BLUESEA1982 on 2009-8-14 00:15. Can 40 kilograms of vaporized gas with a high flash point be sent to the stripping tower after passing through the graywater heat exchanger? Colleagues, what is the normal operating pressure for a stripping tower? The acidic gas coming out of the stripping tower passes through a water cooler; there is a risk of carbonamide crystals forming and causing blockages. What temperature is generally maintained for the acidic gas exiting the water cooler in various plants?
1. After 40 kilograms of gasification, can the high-flash gas be sent to the stripping tower after passing through the graywater heat exchanger? Yes, generally after heat exchange, it is sent to the stripping tower after separation in a separation tank. 2. Colleagues, what is the normal operating pressure for a stripping tower? The pressure in the stripping tower is generally controlled at 1.5 to 2 kilograms. 3. The acidic gas coming out of the stripping tower passes through a water cooler; there is a risk of carbon ammonium crystals forming and causing blockages. What temperature is generally maintained for the acidic gas exiting the water cooler in various plants? 75~90 degrees; crystallization of ammonium salts is likely to occur if it falls below 70 degrees.