Reasons for frost in the incubator
Thread Content
Reasons for frost in the incubator: 1. Because the configuration pipeline is close to the box, especially the liquid or low-temperature pipeline. 2. The narrow slits on the wall of the cooling box are prone to frost. 3. Some cold box panels are not tightly sealed and have a small amount of frost forming, especially at the flange sleeve. 4. If frost is severe, there may be leaks in the pipes or equipment in the cold box. 5. Pearlescent sand will also form frost when exposed to moisture.
More specific haha thank you sir haha
There is also a bracket that conducts cold, which is called a cold bridge.
There is also the sealing air injection is too large.