Filter settings
Thread Content
As the title suggests, for example, can two pumps (acting as backups for each other) installed on the pipeline filter before the valve be shared as one common unit?
They cannot be shared; if the filter needs to be repaired, neither pump can be used
What was said upstairs is correct; they cannot be shared.
Yes, indeed, sharing them in production would cause a lot of problems, and it’s also difficult to get the two pumps to operate in balance
Typical pipeline filters, such as Y-shaped pipeline filters and T-shaped filters, basically each have their own pump and are separate; they are usually not shared. However, for such large filters, it is possible to consider sharing one to save costs.
They cannot be shared; both pumps must be stopped when the filter is being serviced