Discussion on carrying out an activity to upload specifications and parameters for ammonia synthesis equipment

Thread Content

Due to the complexity of its production process, synthetic ammonia manufacturing involves a wide range of different process technologies in various stages; even when the same process technology is used, the equipment selected can vary； Everyone may be well aware of the specifications of the equipment used in their own factory, but it’s difficult to determine whether there are any differences compared to other factories. Moreover, when making adjustments to the scale of operations, it’s even harder to clarify what specifications should be used ； To this end, it is proposed to carry out an initiative to upload the specifications and technical parameters of the main equipment in various work sections. I. Purpose: To activate the section, broaden perspectives, and enhance the practicality of its content. II. Posting format: 1. Process technology type: such as fixed-bed batch gas generation, medium-shift low conversion, full low conversion, etc ； 2. Plant production scale: e.g., 80,000 tons of synthetic ammonia per year ； 3. Main equipment and parameters: In the format of: Equipment name 1, specification model and technical parameters, quantity (indicate how many are in use and how many are in reserve if not all are in use) ； Equipment name 2, specification model and technical parameters, quantity (indicate how many are in use and how many are in reserve if not all are in use) ； Equipment name 3, specifications and technical parameters, quantity (indicate how many are in use and how many are in reserve if not all are in use) ； .......... Equipment name n, specification model and technical parameters, quantity (indicate how many are in use and how many are in reserve if not all are in use) ； The technical parameters should be specified in as much detail as possible; for example, regarding compressors, the intake volume, intake pressure, and discharge pressure must be indicated ； The reactor should indicate the amount of catalyst or filler loaded (for partially loaded reactors, the amount loaded for each section should be specified); heat exchangers should indicate their heat exchange area, etc ； Please vote and share your thoughts on whether this event should take place.