Which pumps require pressure gauges at their outlets
Thread Content
As the title suggests: Which pumps require pressure gauges at their outlets?
As far as I remember, most pumps in our on-site installations are equipped with pressure gauges; there are hardly any without them. By installing pressure gauges at the outlet, it is possible to monitor the operation of the pumps in a straightforward manner and determine promptly whether they are operating normally. At the same time, it can also serve as an indicator of pump capacity at certain times
Well, it’s usually installed on centrifugal pumps. But now there’s a new pump – is it necessary to set up an outlet for the pneumatic diaphragm pump?
All the pumps I’ve seen are equipped with pressure gauges. As for pneumatic diaphragm pumps, tell me what the effect of having such a gauge is.
All pumps should be equipped with pressure gauges, although the type and material of these gauges need to be selected based on actual conditions.
What pump doesn’t need a pressure gauge? The metering pump needs to be installed anyway. It’s needed not only on the pipelines but also on the dampers
Ordinary pumps are not used; vacuum pumps are necessary
All of them need to be equipped with pressure gauges! How to determine the operating condition of a pump without applying pressure?
Pumps in general should be equipped with pressure gauges to facilitate monitoring of their capacity.
For pneumatic diaphragm pumps, a device should be installed at the inlet or outlet; the pressure of the air supply corresponds to the outlet pressure of the pump. For electric pumps, such a device is generally added after the pump, in order to monitor the pump’s operating conditions and the head pressure