Searching for the right enamel kettle and mixer
Thread Content
The components of this product are 10% hydrochloric acid, 15% sodium chloride, with a solid content of 30%. The temperature range is 120-30. I was wondering if anyone could recommend enamel reactors and mixers. Also, is there anyone who can advise on how to extend its service life?
Is the reaction referred to by the poster a liquid-solid reaction or a liquid-liquid reaction (with the solid acting as a catalyst? ) Different types of reactions require certain considerations when selecting agitators; for lower requirements, impeller-type agitators can be used, while for special requirements, it is necessary to ask the manufacturer to design one. The most important aspect of enamel-lined reactors is their processing. First, the steel core (including all the connection flanges) must be heat-treated to remove stresses, and after enameling, it needs some time – preferably more than 30 days – for it to age. During the on-site inspection upon equipment arrival, it is essential to carefully check inside the furnace for any signs of ceramic cracking, especially at the weld areas. Enameled containers are relatively more resistant to acids. It is important to avoid sudden changes in temperature during use, and hard objects should not be used to clean the enamel surface. If any damage to the enamel occurs, it must be repainted with enamel or repaired using resin as soon as possible, to prevent further corrosion of the metal.
Contact Zibo Santian Mechanical Sealing; their airfoil-type axial flow stirrers can mix iron sand up to the liquid surface.
Linyi Huatai Hengchang Chemical Equipment Co., Ltd. specializes in the sale of various anti-corrosion equipment made of enamel and glass-lined materials. The main products include glass-lined reaction tanks, glass-lined mixers, temperature control sleeves, etc. Contact person: Mr. Zhang; phone number: 13455934591; fax: 0539-8511073. We produce and sell these products ourselves, offering the lowest prices in the country. It is recommended to use mixers made from high-temperature ceramic glaze, as they are wear-resistant and corrosion-resistant, yet come at a low price with good quality. Push-type mixers are not practical due to their high cost
Your company deals in hydrochloride products, right?
Great, let’s all contribute our ideas! Teaching has begun!
I don’t quite understand what you mean by letting the device age over 30 days Is it left to stand still?
Carbon steel tank, lined with ordinary cement + acid-resistant cement + fiberglass-reinforced plastic + acid-resistant tiles; equipped with multi-layer paddle agitators covered with fiberglass-reinforced plastic