What does it mean to standardize drawings?
Thread Content
The company has asked me to standardize the drawings for the equipment. I don’t know how to do this; please help me. Thank you. For example, for desulfurization tanks of different sizes
For example, in accordance with national standards, the wire thickness, the way valves are drawn, the methods of labeling, and so on, all need to be drawn in a standardized manner
Drawings shall be prepared in strict accordance with drawing standards, with lines, fonts, sheet sizes, etc., meeting the required standards； The six basic standards must be implemented in the drawings, and the standard numbers of standard parts should be indicated in the title block.
One of them is to improve the material list. Part codes are improved in accordance with **standard or corporate standards.
Drawings must be created in strict accordance with drawing standards: lines, fonts, sheet size, etc., must meet the specified requirements. The title block, bill of materials, version information, page numbers, scale, etc., must all comply with the standards. In addition, the processing technical requirements must also be fully addressed.
Drawings shall be prepared in accordance with the provisions and requirements of relevant standards.
Standardization – do you mean organizing those messy drawings? Is there a problem with the drawing itself, is it not standardized enough? Things that should have title bars lack them, and those that require technical specifications haven’t been addressed. Wait. A complete drawing must comply with technical standards and specifications, such as the title block, technical requirements, and dimensional ratios.
Drawings shall be prepared in strict accordance with drawing standards, with lines, fonts, sheet sizes, etc., meeting the required standards； The six basic standards must be applied in the drawings, and the standard numbers of the standard components should be indicated in the title block; one of these is to improve the material list. Part codes are improved in accordance with **standard or corporate standards.
The so-called standardization involves checking whether your drawings comply with relevant standards – things such as the paper size, annotations, font styles, font sizes, orientation of views, line thicknesses, and so on. There are specific **standards for all these aspects; you can’t just do whatever you want. Well, such drawings would be incomprehensible to others once they’re produced, right? Only by following the standards can the drawings be understood by anyone wherever they go.
Various standard drawing methods are specified in all types of drawings for machinery, construction, etc., as this is the only way to ensure interoperability between drawings. All these established drawing methods are known as standardized drawing specifications.
As I understand it, standardization includes not only the drawing standards and specifications mentioned above but also the fact that for drawings of the same model produced later, it is sufficient to indicate which model to use; there is no need to create new drawings. Once the drawings for Desulfurization Tank Model 1 have been standardized, in future whenever it is used, simply stating that Desulfurization Tank 1 is to be used will be sufficient, and everyone will know which set of drawings to use. Standardization saves drawing time and improves production efficiency.