Filters in the ammonia synthesis system
Thread Content
I work in the field of liquid filtration equipment, and I’d like to ask everyone which stages in the production of synthetic ammonia involve the use of filters. I’m referring to liquid filters – such as bag filters, cartridge filters, or fully automatic filters. I’ll do my best to reward those who leave comments, even if it’s just 5 rewards, as a way to express my gratitude
In synthetic production, the decarburization system is primarily used for filtering the decarburization liquid, while the steam condensate and process condensate recovery systems are employed for that purpose as well.
Are these three stations the only ones in the entire ammonia synthesis system that use filters? Why hasn’t anyone else added anything?
There are too many processes that need to be filtered. In the copper washing process for synthetic ammonia feed gas, there are operations such as filtering to purify the copper melt, filtering the carbon propylate solution, and filtering the circulating water. But they are all professional-type filters, with different filtration media.
Could you provide more details on the professional-type filters mentioned upstairs? For example, what type of filters are used by copper plating technicians?
I know that low-temperature methanol washing requires filters; which manufacturer are you from?
Filters are usually installed at the inlet of mechanical pumps, to prevent external substances from entering the system
Shanghai Liyang Filtration Technology Co., Ltd
There are too many processes that need to be filtered. In the copper washing process for synthetic ammonia feed gas, there are operations such as filtering to purify the copper melt, filtering the carbon propylate solution, and filtering the circulating water. But they are all professional-type filters, with different filtering media; just my humble opinion.
In our synthesis section, filters are also needed between the compressor stages, either membrane or screen type