Is there any conflict when converting between CAD2006 and CAD2004?
Thread Content
As the title says. There are any issues when opening a drawing created in CAD2006 using CAD2004?
The drawings you create using CAD 2006 can be saved in the 2004 format, so they will open without any problems when used with CAD 2004. But if they are in the 2006 format, will CAD 2004 be able to open them?
Generally, higher versions can open lower versions, while lower versions cannot open higher versions. Such problems are often encountered during the design process; since many organizations are using version 2004, files are generally saved in that version.
As I recall, CAD 2006 and CAD 2004 are fully compatible; there is no issue with higher or lower versions； Problems with the DWG format only appeared starting with CAD 2007. Also, remember that the CAD 2002 format is special and cannot be compatible with CAD 2004, CAD 2000, and so on.
There should be no problem; the files saved in version 06 are also in 04 format, while files saved from version 07 onward are in 07 format