How great can fluorinated IHF centrifugal pumps be?
Thread Content
Our company’s IHF fluorine-lined centrifugal pumps range up to the IHF200-150-400 model, with a flow rate of 400 m3/h, a head of 50 m, and a motor power of 110 KW at 1450 revolutions per minute. I’m wondering if there are any fluorine-lined IHF pumps in China that are larger than these
Just mention the power; I’ve seen 120KW ones
The IHF200-150-400 model has a flow rate of 400 m3/h, a head of 50 m, and a motor power of 110 KW at 1450 revolutions per minute; it is the largest fluoroplastic-lined pump I have ever seen. It’s a bit late to discover this now – we tried to find it in the past but were unable to do so, so we had to use steel-lined polyethylene pumps instead, although such pumps have relatively low efficiency.
Our company’s largest model is the IHF150-125-315, with a maximum flow rate of 200 m3/h and an axis power of 23.2 Kw
It starts with IH; the maximum diameter according to the 2858 standard is this value! 200-250-400
Claus magnetic pump on the 5th floor: 2858. The maximum specified value is 200-150-400; your value for the outlet is higher than that for the inlet, so it’s likely there’s a mistake. Currently, the maximum capacity of non-metallic magnetic pumps is 200-150-350; you should be aware of this from the manufacturers.