Targeted legal regulations for machining enterprises

You can check these in the standard section; there, the information is more comprehensive

This post was last edited by hkj0221 on 2009-9-9 10:44 to provide a table of contents. Some of them may have been replaced with new standards; you’ll need to check on your own. (1) The Work Safety Law of the People’s Republic of China (Decree No. 70 of the People’s Republic of China); (2) The Fire Protection Law of the People’s Republic of China (Decree No. 6 of the People’s Republic of China); (3) The Law of the People’s Republic of China on the Prevention and Control of Occupational Diseases (Decree No. 60 of the People’s Republic of China); (4) The Law of the People’s Republic of China on the Prevention and Control of Environmental Noise Pollution (Decree No. 77 of the People’s Republic of China); (5) Regulations on the Safety Management of Hazardous Chemicals (State Council Decree No. 344); (6) The Environmental Protection Law of the People’s Republic of China (Decree No. 22 of the People’s Republic of China); (7) Regulations on the Safety Supervision of Special Equipment (State Council Decree No. 549); (8) Provisions on the Safety Supervision of Residual Current Devices (Ministry of Labor Order No. 16, 1990) ； (9) “List of Hazardous Chemicals” (Announcement No. 1 of 2003 by the Work Safety Supervision Bureau, 2002 edition) (10) “Rules for Fire Safety Management in Warehouses” (Order No. 6 issued by the Ministry of Public Security) ； (1) General Rules for Safety Assessment (AQ8001-2007) (2) Guidelines for Pre-safety Assessment (AQ8002-2007) (3) Code for Fire Protection Design of Buildings (GB50016-2006) (4) Hygienic Standards for the Design of Industrial Enterprises (GBZ1-2002) (5) Code for General Layout Design of Industrial Enterprises (GB50187-93) (6) Occupational Exposure Limits for Hazardous Factors in the Workplace (GBZ2-2007) (7) Code for Noise Control Design in Industrial Enterprises (GBJ87-85) (8) Identification of Major Hazard Sources (GB18218-2000) (9) General Safety Requirements for Machining Equipment (GB12266-1990) (10) Classification of Hazards and Harmful Factors in Machining Equipment (GB12299-1990) (11) Code for Occupational Safety and Health Design in the Machinery Industry (JBJ18-2000) (12) Safety Distances in Machinery Safety to Prevent Upper Limbs from Reaching Hazardous Areas (GB12265.1-1997) (13) Safety Distances in Machinery Safety to Prevent Lower Limbs from Reaching Hazardous Areas (GB12265.2-2000) (14) Minimum Distances in Machinery Safety to Avoid Compression of Various Body Parts (GB12265.3-1997) (15) Machinery Safety – General Requirements for the Design and Manufacture of Fixed and Movable Protective Devices (GB/T8196-2003) (16) Safety Requirements for Protective Screens (GB8197-1987) (Replaced by GB/T8196-2003) (17) Safety Regulations for Grinding Machinery (GB4674-1984) (18) Safety Regulations for Lifting Machinery (GB6067-85) (19) Hazardous Parts and Markings of Lifting Machinery (GB15052-94) (20) Safety Regulations for Lifting Gear and Ropes of Lifting Machinery (LD48-93) (21) Safety in Welding and Cutting (GB9448-1999) (22) Hygienic Standards for Welding Fumes in Workshop Air (GB16194-96) (23) Safety Regulations for Painting Operations (GB6514-86) (24) Principles for Risk Assessment in Machinery Safety (GB/T16856-1997) (25) Safety Regulations for Painting Operations – Technical Specifications for Paint Booths (GB14444-93) (26) Safety Regulations for Painting Operations – Technical Requirements for Work in Confined Spaces (GB12942-91) (27) Technical Conditions for Fixed Steel Straight Ladders (GB4053.1-93) (28) Technical Conditions for Fixed Steel Sloping Ladders (GB4053.2-93) (29) Technical Conditions for Fixed Industrial Guardrails (GB4053.3-93) (30) Code for Lightning Protection Design of Buildings (GB50057-94, 2000 edition) (31) Code for Seismic Design of Buildings (GB50011-2001, 2008 edition) (32) Classification and Marking of Common Hazardous Chemicals (GB13690-92) (33) List of Hazardous Goods Names (GB12268-2005) (34) Classification and Coding of Hazardous Goods (GB6944-2005) (35) Warning Labels for Gas Cylinders (GB16804-1997) (36) Color Markings for Gas Cylinders (GB7144-1999) (37) Standard for Building Lighting Design (GB50034-2004) (38) Standard for Building Daylighting Design (GB/T50033-2001) (39) Classification of Toxic Operations (GB12331-90) (40) Requirements for Installation of Fire Safety Signs (GB15630-1995) (41) Fire Safety Signs (GB13495-92) (42) Guidelines for the Use of Safety Signs (GB16179-1996) (43) General Principles for Safety and Hygiene Requirements in the Production Process (GB12801-1991) (44) Fixed Industrial Steel Platforms (GB4053.4-83) (45) Code for Design of Electrical Installations in Explosive and Flammable Environments (GB50058-92) (46) Code for Design of Fire Extinguishers in Buildings (GB50140-2005) (47) Code for Grounding Design of AC Electrical Installations (GB50065-94) (48) Code for Design of Low-Voltage Distribution Installations (GB50054-95) (49) Code for Design of Power Supply and Distribution Systems (GB50052-95) (50) Installation and Operation of Residual Current Protection Devices (GB13955-2005) (51) Code for Distribution Design of General Electrical Equipment (GB50055-93) (52) Code for Design of Substations of 10 kV and Below (GB50053-94) (53) Types of System Grounding and Their Safety Technical Requirements (GB14050-93) (54) General Guidelines for Preventing Static Electricity Accidents (GB12158-2006) (55) Safety Colors (GB2893-2001) (56) Safety Signs (GB2894-1996) (57) Markings for Vehicles Transporting Hazardous Goods by Road (GB13392-2005) (58) Guidelines for Formulating Emergency Response Plans for Work Safety Accidents in Production and Business Entities (AQ/T9002-2006) (59) Classification of Work-related Injury and Death Accidents in Enterprises (GB6441-86) (60) Code for Design of Heating, Ventilation and Air Conditioning Systems (GB50019-2003) (61) Classification of Noise-related Operations (LD80-95) (62) Code for Design of Factory and Mine Roads (GBJ22-87)