Technical help: Steam condensate recovery system!
Thread Content
This post was last edited by hesonchang214 on 2010-1-31 08:39. I would like to ask: in large chemical enterprises, what is the recovery rate achievable with closed-loop steam condensate recovery systems?
If a closed-loop system is used for condensate recovery, the recovery rate of condensate can exceed 98%, while the heat recovery efficiency can be over 95%. The reuse of condensed water should be planned in light of the actual conditions within the plant; however, the following points must be taken into consideration: 1. The recovery of condensate must not interfere with the normal heat exchange processes in the production units, i.e., process safety must be maintained. 2. Condensate recovery must not lead to energy waste, and there should be no leaks that could cause additional thermal pollution or energy loss. 3. The reuse of condensed water requires consideration of water quality. 4. When reusing condensed water, both its thermal energy and water resources should be utilized. 5. The most reasonable and efficient way to utilize condensed water is by sending it directly to boilers or deaerators. Beijing Hileri Company specializes in addressing various issues related to condensate and waste steam recovery. If you need assistance, please contact me: Mr. Wu, QQ； 104941850 TEL: 13601238204 010-80547148