Measurement and calculation of methylammonium pump
Thread Content
This post was last edited by lxq700918 on 2009-11-15 14:59 CO2 stripping method of urea. How much methylammonium solution is needed to produce one ton of urea is measured by the methylammonium pump. . . . . . . .
Methylamine pumps must be high-speed pumps and require corrosion resistance.
This post was last edited by 1025199692 on 2009-11-15 19:07 For the aqueous solution full cycle method, based on tons of urea: Ammonia pump 2.2-2.4 cubic meters, first liquid 1.1 cubic meters ammonia water 0.16 cubic meters second liquid 0.32 cubic meters First cold water added 50kg Second cold water 100kg
For CO2 stripping urea, the amount of methylammonium liquid required to produce one ton of urea is controlled differently by each factory, which is mainly determined by the actual production conditions of the factory. Under normal circumstances, we control 0.4~0.7 cubic meters/ton of urea.