The internal structure of the pressure guide tank in the middle of the pressure guide pipe! ?
Thread Content
This post was last edited by Ah-Dai-Amu on 2009-11-7 17:50. At first, the pressure pipe was open, but when I opened the valve later, nothing happened.； Is the inside as open as an ordinary pressure tube? Shrimp friends, it would be best if you have pictures to explain.
Supplement: I removed the pressure gauge and added liquid to it, and the pressure only increased a little. I suspect the outlet pipe is clogged!
This tank is also known as the isolation tank! The high-temperature oil vapor is condensed through the isolation tank to isolate the magazine before entering the pressure gauge mouth. ； The possible reason is that the magazine was brought into the pressure pipe behind the isolation tank during the exhaust, causing blockage. However, after my own tapping, it still didn't work, so I had to disassemble the pipe and try to clear it. Unfortunately, this section of pipeline was welded, otherwise it would be much more convenient. What a hassle!