How to set conditions for the equipment?
Thread Content
I’m new to this and I’m not very clear yet. Please give me some advice. It’s best to have examples. Thank you.~
Only the specific requirements of the specific process can be selected.
It’s OK to clarify everything on the data sheet that provides conditions for the equipment! Haha, but it’s usually difficult! Just some key data.
The non-standard equipment design condition diagram (table) consists of three parts:: Equipment technical characteristics and requirements, nozzle table and equipment diagram
Mention process parameters, media attributes, etc., for example: water supply and drainage: Mention flow rate, pressure, temperature, medium name, properties (corrosiveness) and other process parameters; water tank storage volume, media attributes, etc. The equipment will choose reasonable pipes, valves, and water tanks. Generally, those who engage in equipment will ask you to fill out a form. Pay attention to timely collection of other general drawings and progress of civil engineering majors. Newcomers to design institutes usually have mentors.
What does the craftsman want the equipment to do? It’s not difficult to ask questions when the purpose is clear. Please fill in clearly the items on the equipment data sheet that you require the equipment to do, and it will be OK.
Just ask your master. Different equipment has different requirements. In addition, you can look at the conditions of your major in the same project, so that you can get started quickly. Look at other people who have done the same project. It is best for craftsmen to specialize in one direction, which will last a lifetime.
Find a senior equipment engineer and simulate more complex conditions once. It will be OK. It will be better if you have actual practice opportunities.
1# gao* aoquan Fill out the data sheet of the relevant equipment, draw the schematic diagram of the equipment, determine the opening size, opening positioning and special process requirements, and then entrust the equipment.