Solid content of oil slurry in catalytic cracking unit
Thread Content
The original unit of oil slurry solid content was g/l and the index was no more than 6. Now it is changed to unit %. The w/w index is no more than 1. I don’t know what the unit is.
w/w is the weight (or mass) percentage, 1 is 1%, there is no unit.
What is the approximate density of the oil slurry? Will it be relaxed or reduced after this change?
Relaxed, 1% is equivalent to a little more than 10g/L.
The density of oil slurry is generally between 1.02-1.05
The solid content index of the oil slurry in our device is ≯10g/l. The solid density of the oil slurry is generally 970-1120Kg/m3. According to this data, the index converted into a percentage should be: Between 0.89%-1.03%. The solid content of oil slurry (unit is g/l) is not greater than 6, which is relaxed. ； For our device, it is basically the same.