Thread Content
Phenomenon: 1: Power outages occur without any reason, and then the power is restored after a while. 2: Even when there is time to turn on the light, it should stop flashing. 3: The main switch has not tripped. If you know, please explain the reason and the solution.
Check the light switch to see if there’s a poor connection
Check if a leakage protection switch is being used Check for leakage points
If the power goes out for no reason and then comes back automatically after a while, without the need for manual restoration; even when the lights are turned on, there is a brief interruption, and the main switch does not trip. Could it be issues such as poor contact at the switch or wires that aren’t properly secured?
Check whether there is any poor contact at the contacts in the circuit
It’s not an overload issue; I think the circuit breaker in the distribution box might be broken. I’ve encountered this situation before; just changing it resolved the issue.
Under normal circumstances, the contacts of the switch do not make good contact
Phenomenon: 1: Power outages occur without any reason, and then the power is restored after a while. Ignore this item; the leakage protection should be excluded
1. Consider the wiring of the electricity meter. 2. Poor contact in the wiring
The connection in the circuit is poor; check whether the wires of the switch, light socket, and leakage protector are properly secured.