What instruments are used for natural gas processing (including desulfurization)?
Thread Content
What instruments are used in the natural gas processing process (including desulfurization) by everyone? If what I’m about to say is not complete, please add to it. 1. Liquid level ----- float, differential pressure, radar 2. Flow rate-----Orifice plate, turbine, vortex street, ultrasonic
Hehe, choose according to your needs; it’s just temperature, pressure, flow rate, and liquid level
Temperature sensors, pressure transmitters, flow meters, level transmitters, etc., in my opinion
Temperature is measured using thermoresistors and thermocouples. Pressure is measured using pressure transmitters; level is measured with floats and double flanges; flow rate is measured using orifice plates, Venturi meters, as well as vortex flow meters. That’s all for our device
Our company uses glass plate level gauges for on-site level indication, and float level gauges for transmitters. For on-site temperature indication, bimetallic thermometers are used; for remote transmission, thermocouples are employed. For pressure measurement, Bourdon tubes and pressure transmitters are used, while for flow measurement, turbines or vortex flow meters are utilized. Of course, each case needs to be analyzed on its own
Level, flow rate, temperature, pressure