What books are needed for the installation of GC2 class industrial pipelines?

I recently handled the work related to renewing the certification for pressure pipelines. I have listed below the main standards we use: “Basic Requirements for Quality Assurance Systems in the Manufacturing, Installation, Modification, and Maintenance of Special Equipment” TSG Z0004-2007; “Regulations on the Safety Supervision of Special Equipment”, Decree No. 373 of the State Council; “Detailed Rules for the Accreditation of Pressure Pipeline Installation Units”, Quality and Technical Supervision Bureau Document No. Guo Fa 99; “Provisions on the Safety Management and Supervision of Pressure Pipelines”, Labor Ministry Document No. Lao Bu Fa 140; “Rules for the Examination and Management of Welders Working on Boilers, Pressure Vessels, and Pressure Pipelines”, National Quality Inspection Bureau Document No. Guo Jian Zao [2002] 109; “Rules for the Assessment, Supervision, and Management of Non-Destructive Testing Personnel for Special Equipment”, National Quality Inspection Bureau Document No. Guo Jian Zao [2003] 248; “Rules for Safety and Quality Supervision and Inspection during Pressure Pipeline Installation”, National Quality Inspection Bureau Document No. Guo Jian Zao 83; “Rules for the Assessment of Personnel Working with Special Equipment”, TSG Z6001-2007; “Welding Procedure Qualification for Steel Pressure Vessels”, JB4708-2000; “Welding Regulations for Steel Pressure Vessels”, JB4709-2000; “Code for Construction and Acceptance of Industrial Metal Pipelines”, GB50235-1997; “Code for Construction and Acceptance of Welded Works on On-Site Equipment and Industrial Pipelines”, GB50236-1998; “Non-Destructive Testing of Pressure Vessels”, JB4730-2005; “Code for Construction and Acceptance of Pipelines for Toxic and Flammable Media in the Petrochemical Industry”, SH3501-2002; “Code for Construction Quality Acceptance of Petroleum and Natural Gas Engineering Projects”, SH4201–4209-2007; “Technical Specifications for Corrosion Prevention of Equipment and Pipelines in the Petrochemical Industry”, SH3022-2000; “Code for Construction and Acceptance of Water Supply and Drainage Pipelines in the Petrochemical Industry”, SH3533-2003; “Code for Construction and Acceptance of Process Pipelines within Petroleum and Natural Gas Stations”, SY 0402-2000; “Code for Construction Quality Acceptance of Static Equipment Installation in the Petrochemical Industry”, GB 50461-2008; “General Code for Construction and Acceptance of Machinery and Equipment Installation in the Petrochemical Industry”, SH3538-2005; “Code for Construction Quality Acceptance of Petroleum and Natural Gas Engineering Projects”, SY_4200-2008–4209-2008; “Petrochemical Maintenance and Repair Procedures”, 2004; “Technical Requirements for High-Quality Carbon Structural Steel”, GB/T699-1999; “Hot-Rolled Thin Sheets and Strips of Carbon Structural Steel and Low-Alloy Structural Steel”, GB912-89; “Basic Forms and Dimensions of Grooves for Welds in Gas Welding, Manual Arc Welding, and Gas-Shielded Welding”, GB985-2007; “Unspecified Tolerances for Linear Dimensions in General Tolerances”, GB/T19804-2005; “Cold-Rolled Stainless Steel Sheets”, GB3280-92; “Hot-Rolled Stainless Steel Sheets”, GB4237-92; “Seamless Steel Tubes for High-Pressure Boilers”, GB5310-2008; “Seamless Steel Tubes for Low- and Medium-Pressure Boilers”, GB3087-2008; “High-Pressure Seamless Steel Tubes for Fertilizer Equipment”, GB6479-2000; “Seamless Steel Tubes for Liquid Transportation”, GB8163-2008; “Seamless Steel Tubes for Petroleum Cracking”, GB9948-2006; “Stainless Steel Seamless Steel Tubes for Boilers and Heat Exchangers”, GB13296-91; “Stainless Steel Seamless Steel Tubes for Liquid Transportation”, GB/T14976-2002; “Stainless Steel Welded Steel Tubes for Liquid Transportation”, GB/T12771-91; “Butt-Welded Steel Flanges”, GB/T9115.1–9115.4-2000; “Raised-Face Threaded Steel Pipe Flanges”, GB/T9114-2000; “Flat and Raised-Face Welded Steel Pipe Flanges”, GB/T9119-2000; “Steel Pipe Flanges”, HG20592–20614-2009; “Code for Construction and Acceptance of Urban Gas Transmission and Distribution Projects”, CJJ33-2005; “Code for Construction Quality Acceptance of Steel Structure Projects”, GB50205-2001

The information listed on the 2nd floor is quite comprehensive; the poster should take a closer look at the \"Code for Construction and Acceptance of Industrial Metal Piping\" GB50235-1997 and the \"Code for Construction and Acceptance of Welded Works of Field Equipment and Industrial Piping\" GB50236-1998

GB16912-2008 Safety Technical Regulations for the Production of Oxygen and Related Gases by Deep Freezing Method

GBT 20801-2006 Code for pressure pipelines – Industrial pipelines; this standard should also be studied*