Seeking advice from seniors on reaction issues
Thread Content
Why is a waste heat boiler required in heavy oil catalytic units?
Recycle excess waste heat to reduce heat loss.
Since heavy oil catalytic cracking deals with heavy crude oil, a large amount of heat is generated. If the heat in the flue gases can be utilized effectively, a significant amount of money can be saved. Install a waste heat boiler on the flue duct ； 1. Generate some steam, thereby reducing the amount of steam required from outside ； 2. My device is installed in the waste heat boiler to heat and dehydrate the unpurified air ； 3. Superheat the incoming steam to prevent it from containing water.
Generally, the flue gas temperature at the inlet of the residual boiler is around 500°C, while it is around 200°C at the outlet. When the volume of flue gas is high, more thermal energy can be recovered from the flue gas. Reduce the energy consumption of the device.
Energy conservation and reduced consumption bring numerous environmental benefits.
This is beneficial for the **energy consumption of your device.