Titanium tube leak repair contact
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 21:30. There are a total of 12 leaks on TA2 titanium pipes, refined brine and chlorine pipes, DN250 and DN450 pipes that need to be repaired. Does anyone know a good repair welding technology? Please help introduce it. Thanks! # hcbbs
Welding titanium pipes requires high technology, especially inertia protection. We couldn't find a good construction team for the first phase of the project because of the tight schedule. Later, we found a company in Linqu, Shandong that welded without leakage for three years.
When choosing a titanium equipment repair manufacturer, there is no need to look far away, as long as it is a manufacturer that can produce titanium welding equipment. Of course, welding titanium is a manual job with high technical requirements, and auxiliary personnel are required to provide argon protection. The cooperation of the two is also very important.
Which company is the owner of? Our company is a manufacturer of titanium non-standard chemical equipment. We have a lot of experience in supporting caustic soda plants. If you need it, you can contact me.
my suggestion: If you can stop the car, just replace it. There is no benefit in repair welding this thing. 1. Welding will change the local crystal phase structure and form local material defects. 2. Welding will melt the medium into the material, causing dead pixels. Therefore, it is recommended to stop and replace it. If it is impossible to stop the vehicle, use pressure plugging method to deal with it.
Could you please tell me which company you are from? Where exactly? I'm on a business trip right now, and I don't have the contact information of the titanium equipment company where we repaired it with me. I'll send it to you when I get back to the company. My contact information: QQ: 993304977, E-mail:leeukung@163.com
Don’t know which area the 1st floor is in? Usually people from XX chemical construction companies usually have senior welders who are competent in non-ferrous metal welding. For example, three-phase construction, six-phase construction, seven-phase construction, etc.
Just find two masters with experience in titanium welding. If you have any technical questions, you can call us for consultation.
Titanium welding is not difficult. If you need to know more, please contact me.
The poster didn't specify whether it was south or north. I know of manufacturers such as Suzhou Fengyuan and Xi'an Tianli that can help you with welding repairs.