How should the roof of the hydrogen compression plant be handled?
Thread Content
How should the roof of the hydrogen compression plant be handled? There are small devices on the roof
Use steel structures to support small equipment, and the factory building must be well-ventilated to prevent any leaked hydrogen from accumulating inside it.
Such factories generally use lightweight roofs for explosion protection.
Roofs are generally made of lightweight materials, with equipment placed on the roof structure.
The factory building needs to be well-ventilated to prevent the accumulation of hydrogen, and it should be constructed using fire-resistant materials in a frame structure to facilitate fire and explosion prevention.
The roof is generally single-slope and made of lightweight steel; there are no enclosing walls, or only partial enclosing walls, to prevent the accumulation of hydrogen. . .
Use steel structures to support small equipment; the factory building must have good ventilation
The roof is sloped and supported by steel structures. Lightweight and well-ventilated.
OP, for the roofs of such factories, a lightweight roof can be used, or lightweight roofing materials can be installed in the openings of large roof panels. Steel roof trusses can also be employed, but they must be fire-resistant!
OP, the walls of such factories can also be equipped with lightweight wall panels for explosion protection!