cad
Thread Content
Why does a CAD drawing become so small when copied to a word document?
Can you adjust the ratio? ?
After copying it to Word, it can be edited as an ordinary picture and can be stretched at will.
Just edit the size of the picture in word
The best way to find it is to maximize the view in the CAD drawing, and then use the picture cutting tool to remove the blank space.
Don't copy, it's difficult to adjust and lacks clarity. The most practical method is to insert from the word document - object - create from file - guide the stored CAD file. After inserting, double-click the CAD drawing from word to open the file in CAD mode and adjust it to a suitable size. :handshake Of course, if you must copy it directly into a word document, you can use trim margins to adjust the size of the CAD drawing in word.
You can use CAD to export it into a JEPG picture. If you draw it larger, the picture size will also be larger, and then you can stretch it in Word. However, you need to reset the line width and other things. If the picture produced by this method is very complicated, you will not be able to see it clearly. A simple process flow chart is still fine.
Haha, the method on the third floor is easy to use, learn from it* . grateful!
You can select the required size in CAD when the screen is displayed, and select white as the background color. After selecting the area to be loaded, copy and paste it into the drawing attachment, then select it again, copy and paste it into word, and if you are not satisfied, you can adjust it appropriately.