Torch water seal
Thread Content
Which company’s torches are recommended? What is the function of a water seal? The Bird’s Nest decoration on the torch has been put back in place – how can this be prevented?
The function of the water seal tank is to prevent backfire from venting gas.
The function of the water seal is to prevent tempering, which is its ultimate goal. This can lead to fires in the pipes, among other things. There is also the ability to start sealing.
Some well-known domestic torch brands include 711, Zhongsheng, etc
A water seal prevents fire from flowing back in； Don’t make the top of the torch flat; just find a way to make it protrude.
The water seal is mainly used to prevent backfire! The one we use is the 711 version
The function of a water seal tank: It is the best device for preventing backfire, as it isolates the flare from the facility and protects the upstream pipelines and equipment； Second, it serves as a pressure control device when torch gas recovery facilities are installed. The water seal tank is located between the liquid separation tank and the flare stack.
To prevent birds from nesting, a stainless steel wire mesh can be installed at the torch opening
Reply to 8# pengba: Ensure positive pressure in the pipeline before the water seal.
1. Prevent tempering. 2. As a pressure control device for the entire torch system.
1. Prevent tempering； 2. Control the pipeline network pressure by adjusting the water seal height ； 3. Remove some of the condensate from the low-voltage section.