Container-mounted agitator
Thread Content
There is a container tank whose high solid content in the fluid affects the operation of the tank and the pump. (The bottom of the tank and the pump inlet are prone to clogging.) I want to add an agitator, but there are containers connected to the top of the tank, so it’s not possible to install nozzles there; therefore, I’m thinking of using the inlet on the side to fit the agitator there. I’m not sure what the results will be How should a mixer be selected if it is feasible? Please feel free to offer suggestions; thank you!
The side mixer is quite mature and performs well, but I’m not aware of your specific operating conditions. In our industry, side stirrers are used for vacuum crystallization. There are both imported and domestic ones. It’s easier if your tank has no special requirements, such as corrosion resistance, high vacuum, or high pressure. We use it under high vacuum conditions. It’s inexpensive and functional; I recommend Shandong Zibo Wantong Machinery Factory. It offers the same performance but at a higher cost; I recommend the propellers produced by Jiangsu Xinhongda or Zhejiang Great Wall Reducers. No matter how good the recommendations for imported products are.