CS3000 Sequence Control Module
Thread Content
I’m not sure where on the forum I can find detailed instructions for the CS3000 sequence control module; ideally, it would be comprehensive. I’ve downloaded many versions, but none of them are complete. Thank you very much! !
Yokogawa’s documentation is divided into: GS manuals, TI manuals, and IM manuals. The GS manual contains the General Specifications; it primarily describes the system’s functions and hardware parameters. The TI manual provides Technical Information, focusing on the functions of various components, hardware installation instructions, and parameters. The IM manual is an Instruction Manual that offers detailed explanations of each component’s functions. Among these, the IM manual is the most useful, as it provides detailed information on the CS3000 sequence control module – specifically, it refers to the IM manual for the control station, namely IM 33S01B30-01E CS 1000/CS 3000 Reference Function Block Details, with sections D3-D5 containing detailed descriptions of the sequence control module. It’s important to read through this material carefully. For configuring the control station, this IM manual, IM 33S01B30-01E, is the most commonly used, as it contains detailed information on all the modules of the control station.
You can go to the “Control System Technical Information Sharing Area” and search to see if you can find the information you need. Link to the Chinese user manual for Yokogawa DCS CS3000: http://bbs.hcbbs.com/viewthread.php?tid=212129&page=1#pid923632
Thank you all. I’ve taken a look, and many parts are incomplete; for example, the data in some tables is completely missing. I don’t know where I can find the complete versions.
I don’t know where I can find a GS manual, a TI manual, and an IM manual for the CS3000 – all of them. Thank you very much! ! Of course, it’s best in Chinese.
The reply is very detailed; we need such information.
Take a look here: http://bbs.hcbbs.com/viewthread.php?tid=376410&
The Chinese user manual shared in the group contains only descriptive text for some of the functional blocks; the relevant tables are missing