HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

Water supply issues for venturi scrubbers

2010-03-01View Original

Thread Content

The last edit to this post was made by shenzhou20 on 2010-3-1 at 15:06. Currently, the water supply for washers in coal-water slurry gasification is generally provided by quench water pumps. The advantages of replacing these quench water pumps with feed water pumps for the carbon scrubbing tower are as follows: 1. The outlet pressure of the feed water pump for the carbon scrubbing tower is higher than that of the quench water pump, resulting in a better atomization effect; 2. The flow rate requirement for the cooling water pump can be appropriately reduced ; 3. The solid content of the gray water at the outlet of the carbon scrubber feed pump is relatively low. What are the disadvantages? Why not adopt this approach?
Reply #22010-03-01
1. The flow regulation capability of the quench water pump is greater than that of the wash tower feed water pump; when adjusting the water volume using a venturi, it may cause large fluctuations in the current of the wash tower feed water pump; 2. The pressure at the outlet of the wash tower feed pump is too high, and it does not change with the system pressure. At the beginning of feeding, this pressure is used to supply water to the venturi, which results in an excessive pressure difference within the venturi and causes significant damage to its internal components.
Reply #32010-03-01
The wash tower feed water pump is a multi-stage centrifugal pump. Using it to supply water to the Venturi washer instead of the quench water pump does have the advantages mentioned by the original poster, but it also raises the technical requirements for such a pump, resulting in higher equipment costs. Secondly, as mentioned above, the outlet pressure of the feed pump for the scrubber tower is high and does not change with fluctuations in system pressure, which hinders the stability of the system; it may also affect the stable operation of this pump.
Reply #42010-04-09
What maximum pressure can a scrubber tower handle?
Reply #52010-04-09
Here, we have two separate pumps for cooling the water; one pump is used for the Venturi effect. The mutual influence between them should be minimal
Reply #62010-04-10
From a technical perspective, there are no issues; it’s completely feasible.

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.