Gasifier instrument problems
Thread Content
What kind of thermocouple is used to measure the temperature of the gasifier wall? And the selection and application status of each regulating valve and shut-off valve?
The wall temperature is of course the surface thermocouple； The problem behind it is probably too big, there is suspicion of mixed posting, haha
Equipment wall thermocouple, or patch thermocouple
{:2_32:}Surface Thermocouple!!!!
How do others answer you when you ask this question? It's so general. If you have the number, I can give you the answer. The 2nd floor is right, the mixed post is coming!
Chip thermocouple. The following question is too big to answer
Surface thermocouples, as for regulating valves and shut-off valves, they all have to be based on process requirements, so we cannot make empty comments here.
The first issue has been solved by "Garfield is not a cat": The use of a thermocouple type thermal cable (thermal cable for short) is a linear temperature sensor that can detect the highest temperature along its line. If it is laid reasonably on a surface, the temperature it measures can be considered as the highest temperature existing on the covered surface. The second question mainly asks about: The usage status of black water regulating valve, slurry cut-off valve, slurry flow meter, and others can also be mentioned. ；
The temperature is a heat-sensitive thermocouple cable from Chongqing Institute of Materials. The oxygen regulating valve and steam regulating valve are made of FISHER/Germany AKA/, and the shut-off valve is made of NELES/Flowserve/MO-GAS.