SW6-1998 V6.0 Patch 2
Thread Content
SW6-1998 V6.0 Patch 2 Download: http://www.tced.com/bbs/dispbbs.asp?boardID=3&ID=399 Solve the following problems: 1. In the safety valve calculation of the parts program, when determining the comparison temperature, the temperature of the medium is in Celsius scale and should be in absolute temperature scale. 2． When obtaining the allowable stress according to the new tolerance regulations, the program limits the maximum thickness of 09MnNiDR plate to 60mm, which is inconsistent with the No. 1 modification of GB150 and should be 100mm. ； The program limits the maximum thickness of aluminum and aluminum alloy sheets 3003, 5052, 5A03, 5A05, 5083, and 5086, which does not comply with the standard. 3． The external pressure cylinder calibration calculation is qualified, but the result displayed on the screen is unqualified. 4． When inputting the floating head data of the floating head heat exchanger program, the inner and outer diameters of the floating head flange gasket cannot be saved in the "Bolt and Gasket Structural Data" page. 5. For jacketed vessels, when both the inner cylinder and jacket are under negative pressure, the program does not calculate.
Patching method: After downloading the file, you can directly release it to the installation directory, or you can decompress it first and then copy the files in the folder to the corresponding folders in the installation directory to overwrite the original files. In fact, some of the file names in Patch 1 and Patch 2 are the same. You can also merge the two patch BIN folders first and then patch them all at once, which is more convenient.