Safe water seal for freezing
Thread Content
The company is located in the north and the winter is cold. The safety water seal installed after the electric defogging will freeze in winter. In this way, the water seal will not work. How to solve it?
1. Regular water flow. 2. Add process hot water
This is the key to normal water flow. On the other hand, inspections can be strengthened and responsibility increased.
1. Long running water 2. Electric heating 3. Steam heating
Add salt to the water, and of course the material of the water seal should be considered.
Add salt to the water, and of course the material of the water seal should be considered. But beware of corrosion! !
Our winter safety water seals use process hot water to prevent freezing, conduct regular inspections, and change the water regularly.
Water can be diverted from the dry-suction cooling circulating water to be used as safety water seal water, and the flow rate can be amplified, and the overflow water can be returned to the circulating pool.
In fact, the simplest way is to replace the water with purified circulating acid
The water level fluctuates with pressure. If there is a long flow of water, will the safety seal still work? I think lowering the freezing point is a good idea. In addition, the safety water seal is not large, so it is also a good way to insulate a small house.