Back to the issue of leakage in the brackish water valve
Thread Content
This post was last edited by sunjl1981 on 2013-1-6 21:03. Topic: What should be done if the brackish water valve leaks? Let’s discuss it together. # hcbbs
The poster mentioned that the valve for returning brackish water is leaking; it should be clearly explained what kind of leakage this is.
Stop adding acid to the electrolyzer, and stop the valve for returning brine. We just changed it for today
What the poster is referring to is probably the valve for the brackish water return tank. We’ve encountered that too; it happened right on the first day of the New Year. Due to chlorine-accelerated corrosion. So there is no other choice but to reduce the flow rate and load to below 6KA, lower the liquid level in the anode solution buffer tank, and appropriately open the drain valves for discharge. Replace the valve as soon as possible. The valve selected for replacement is appropriate, to prevent similar issues from arising in the future
Thank you; the handling here is basically the same as that on the 5th floor. Thank you to all the experts