Problems with the level gauge on site
Thread Content
I have not been to the site, so I don’t know how long the remote level gauge for the liquid level at the bottom of vertical containers or towers is Is it possible to use a wearable device platform?
About half a meter; the use of platforms is not allowed, as it makes it difficult to operate the valves and carry out maintenance, or even impossible in some cases. I have seen devices built in that way, but in those cases, the platform is only used for the 200mm part of the level gauge
Do you mean to make a hole in the platform so that a hand can go through?
The specific length should be determined based on the liquid level control height within the equipment.
The specific length should be determined based on the liquid level control height within the equipment, but it must not be too long, as this could lead to damage due to environmental influences
It depends on what type of level gauge will be used. Could you tell me which type of level gauge should be chosen? Each case must be analyzed on its own merits.
It depends on the layout of the equipment. If the equipment passes through the platform, and the level gauge is needed to measure the liquid level of the entire equipment, it can pass through the platform as well
It is recommended to consult or choose the external level gauge independently developed by Xi’an Zhanhang Electronics Technology Co., Ltd.; this product features non-contact operation, no need for drilling holes or tank cleaning, self-calibration, and online installation. (Hotline: 15596669461)
An actual level gauge can be installed across the platform, as long as the manual valve of the level gauge can be operated easily; convenience is the main consideration