Questions regarding the eight operating procedures

Has the official version already been published? I took a look at the scanned version of the official version that’s circulating online; it seems that the registration number is indeed left blank. LZ didn’t say it; I hadn’t noticed either. I don’t know what’s going on?

Yes, I want to know that too. I just posted a similar post earlier, saying that I was replaced, but the manuscript was still sent for review; I don’t know what to do now

The eight types of work permits are standards set by the Ministry of Chemical Industry (HG), while AQ was issued by the State Administration for Work Safety; a ministry should be at a higher level than an administration, right? But the Ministry of Chemical Industry has now been abolished, and a series of regulations need to be coordinated; things may not yet be sorted out.

Oh no, I’m currently modifying the relevant provisions in our safety management system in accordance with the eight standard operating procedures. If those procedures aren’t recognized, won’t all my efforts be in vain?

Generally speaking, I believe those who are responsible for ensuring safety should adhere to stricter and more practical standards, rather than arguing about whether there is an official registration number or not. Anything that is beneficial to safety can be done without any problem. On a basic level, during the training sessions, experts also explain that this is just a draft for approval and has not yet been officially published. However, we have already revised our corporate systems in accordance with these standards; let those in higher positions handle the matters mentioned above

It might be a bit off-topic, but it can’t be said that a ministry is higher in rank than an agency; the State Administration for Work Safety is also a ministry-level institution.

A friend just told me that these standards already exist; they can be found on a standard-related website, but it costs money, and they are already registered.

We have also received training, and we got a written version with the registration number on it.

This expert has a problem with his mind ^_^ **Notice No. 24 of 2008 issued by the State Administration for Work Safety ** The State Administration for Work Safety has approved the following 81 industry standards for work safety, which shall come into effect as of January 1, 2009; they are hereby published (see attachment). 　　The above standards are published by the Coal Industry Press. 　　appendix: * * Attachment to the catalog of 81 production safety industry standards approved by the State Administration of Work Safety on November 19, 2008 * * The State Administration of Work Safety approved 81 production safety industry standards Catalog serial number Standard number Standard name instead of standard number Implementation date 1AQ1049-2008 Basic requirements for safety approval of coal mine construction projects 2009-01-012AQ 1050-2008 Technical specifications for protective layer mining 2009-01-013AQ1051-2008 Coal mine occupational safety and health personal protective equipment equipment standards 2009-01-014AQ1052-2008 Mine II General technical conditions for carbon oxide sensors 2009-01-015AQ1053-2008 Isolated negative pressure oxygen respirator 2009-01-016AQ1054-2008 Isolated compressed oxygen self-rescuer 2009-01 -017AQ1055-2008 Coal mine construction project safety facility design review and completion acceptance specifications 2009-01-018AQ1056-2008 Coal mine ventilation capacity verification standards 2009-01-019AQ10 57-2008 Chemical oxygen self-rescuer initial oxygen generator 2009-01-0110AQ1058-2008 Coal mine gas inspector safety technical training outline and assessment standards 2009-01-0111AQ1059-200 8 Safety technical training syllabus and assessment standards for coal mine safety inspectors 2009-01-0112AQ1060-2008 Safety technical training syllabus and assessment standards for underground blasters in coal mines 2009-01-0113AQ1061- 2008 Safety Technical Training Outline and Assessment Standard for Coal Mine Drivers 2009-01-0114AQ1062-2008 Safety Technical Training Outline and Assessment Standard for Underground Coal Mine Fitter 2009-01-0115AQ1063- 2008 Safety Technical Training Outline and Assessment Standards for Coal Mine Main Hoist Operators 2009-01-0116AQ1064-2008 Safety Use Specifications for Explosion-proof Diesel Engine Trackless Rubber Wheel Vehicles for Coal Mines 2009-01-0117AQ/T 1065-2008 Method for determination of gas desorption index in drill cuttings MT/T641-19962009-01-0118AQ1066-2008 Method for direct underground determination of gas content in coal seams 2009-01-0119AQ/T 1067-2008 Method for prediction of mine wind flow thermal state 2009-01-0120AQ/T 1068-2008 Oxidation kinetics method for determination of spontaneous combustion tendency of coal 2009-01-0121AQ1069-2008 Safety production training outline and assessment standards for main persons in charge of coal mines 2009-01-01 22AQ1070-2008 Safety production training outline and assessment standards for coal mine safety production managers 2009-01-0123AQ2013-2008 Technical specifications for ventilation safety of metal and non-metal underground mines 200 9-01-0124AQ2014-2008 Technical conditions and test methods for retroreflective mine safety signs LD88-19962009-01-0125AQ2015-2008 Underground mining of gypsum mines Safety technical specifications 2009-01-0126AQ2016-2008 Regulations on wellhead ignition time for uncontrolled natural gas wells containing hydrogen sulfide 2009-01-0127AQ2017-2008 Natural gas wells containing hydrogen sulfide Public hazard degree classification method 2009-01-0128AQ2018-2008 Public safety protection distance for natural gas wells containing hydrogen sulfide 2009-01-0129AQ2019-2008 Metal and non-metal mines Safety performance testing and inspection specifications for anti-fall devices in shaft hoisting systems LD87.5-19962009-01-0130AQ2020-2008 Safety testing and inspection specifications for winding hoists in use in metal and non-metal mines LD8 7.1-19962009-01-0131AQ2021-2008 Safety inspection and inspection specifications for friction hoists in use in metal and non-metal mines LD87.2-19962009-01-0132AQ 2022-2008 Safety Inspection and Inspection Specifications for Lifting Winches in Use in Metal and Non-Metal Mines 2009-01-0133AQ2023-2008 Safety Regulations for Production of Refractory Materials 2009-01-0134AQ/T 3012-2008 Petrochemical Enterprise Safety Management System Implementation Guidelines 2009-01-0135AQ3013-2008 General Specifications for Safety Standardization of Hazardous Chemical Enterprises 2009-01 -0136AQ3014-2008 Safety technical requirements for the use of liquid chlorine 2009-01-0137AQ3015-2008 Technical requirements for chlorine gas trap and eliminator 2009-01-0138AQ/T 3016-2008 Safety Standardization Implementation Guidelines for Chlor-Alkali Production Enterprises 2009-01-0139AQ/T 3017-2008 Safety Standardization Implementation Guidelines for Synthetic Ammonia Production Enterprises 2009-01-0140AQ3018-2008 General Safety Regulations for Hazardous Chemical Storage Tank Area Operations 2009-01-0141AQ3019-2008 Safety Regulations for Transportation, Storage, and Use of Electroplating Chemicals 2009-01-0142AQ3020-2008 Steel Normal Pressure Storage Tanks Part One: Buried horizontal single-layer and double-layer storage tanks for storing flammable and non-flammable liquids that pollute water 2009-01-0143AQ3021-2008 Safety regulations for hoisting operations in chemical production units HG23015-19992009-01-0144AQ3022-2008 Safety regulations for hot operations in chemical production units HG23011-19992009 -01-0145AQ3023-2008 Safety Specifications for Groundbreaking Operations in Chemical Production Units HG23017-19992009-01-0146AQ3024-2008 Safety Specifications for Circuit Breaking Operations in Chemical Production Units HG23016-19992009-01-0147AQ3025-2008 Safety Specifications for Operations at Height in Chemical Production Units H G23014-19992009-01-0148AQ3026-2008 Safety Specification for Equipment Maintenance Operations in Chemical Production Units HG23018-19992009 -01-0149AQ3027-2008 Safety Specification for Blind Plate Plugging Operations in Chemical Production Units HG23013-19992009-01-0150AQ3028-2 008 Safety Specification for Confined Space Operations in Chemical Production Units HG23012-19992009-01-0151AQ4101-2008 Fireworks and Firecrackers Enterprise Safety Monitoring System Pass Technical conditions for use 2009-01-0152AQ4102-2008 General specifications for registration of the flow of fireworks and firecrackers 2009-01-0153AQ4103-2008 Fireworks and firecrackers smoke * * Certification method 2009-01-0154AQ4104-2008 Fireworks and Firecrackers * * Safety indicators and measurement methods 2009-01-0155AQ4105-2008 Fireworks and Firecracker Smoke * * T * T equivalent measurement method 2009-01-0156AQ4106-2008 Fireworks and firecrackers workplace ground resistance measurement method 2009-01-0157AQ4107-2008 Fireworks and firecrackers mechanical drum granulator 2009-01-0158AQ41 08-2008 Fireworks and firecrackers mechanical lead machine 2009-01-0159AQ4109-2008 Fireworks and firecrackers mechanical firecracker inserting machine 2009-01-0160AQ4110-2008 Fireworks and firecrackers mechanical whip binding machine 2009-01-0161AQ 4111-2008 Safety Specifications for Machinery and Electrical Appliances in Fireworks and Firecracker Workplaces 2009-01-0162AQ4112-2008 Regulations for Inspection of Factory Packaging of Fireworks and Firecrackers 2009-01-0163AQ4113-2008 Standards for Safety Evaluation of Fireworks and Firecrackers Enterprises 2 009-01-0164AQ4201-2008 Technical specifications for dust and virus protection in the electronics industry 2009-01-0165AQ4202-2008 Management standard for respiratory coal dust exposure concentration in workplaces LD39-922009-01-0166A Q4203-2008 Workplace Air Respirable Rock Dust Exposure Concentration Management Standard LD41-932009-01-0167AQ4204-2008 Respirable Dust Individual Sampler LD40-19922009-01-0168AQ4205 -2008 Mine individual respirable dust determination method LD38-19922009-01-0169AQ5202-2008 Electroplating production safety operating procedures 2009-01-0170AQ5203-2008 Electroplating production equipment safety technical conditions 2 009-01-0171AQ5204-2008 Safety Technical Regulations for Paint Manufacturing Enterprises 2009-01-0172AQ5205-2008 Safety Regulations for Paint and Stucco Operations 2009-01-0173AQ6105-2008 Foot Protection Mine Industrial safety boots 2009-01-0174AQ6106-2008 Foot protection Food and pharmaceutical industry protective boots 2009-01-0175AQ/T6107-2008 Selection, use and maintenance of chemical protective clothing 2009-01-0176AQ/T 6108-2008 Selection, use and maintenance of safety shoes, protective shoes and professional shoes 2009-01-0177AQ6211-2008 Non-dispersive infrared methane sensor for coal mines 2009-01-0178 AQ7005-2008 Safety requirements for woodworking machinery 2009-01-0179AQ9003-2008 Technical specifications for enterprise safety production network monitoring system 2009-01-0180AQ/T 9004-2008 Guidelines for Enterprise Safety Culture Construction 2009-01-0181AQ/T 9005-2008 Evaluation Guidelines for Enterprise Safety Culture Construction 2009-01-01