Liquid chlorine cylinder
Thread Content
I would like to ask how much liquid chlorine can generally be contained in a 1-ton steel cylinder for liquid chlorine? What is the pressure inside the gas cylinder at this time? What’s the temperature? Why is hot water sprayed before reaching the liquid chlorine vaporizer?
It is usually around 900 kilograms, with a pressure of about 1 MPA.
1 ton is 1 ton (with an error of within 10 kg), but the volume is 800 l; generally, the volume of a 1-ton steel cylinder is 830 l. The pressure inside the bottle is the saturated vapor pressure, which is generally around 0.6 MPa. “\"Spraying hot water before the liquid chlorine vaporizer is not advisable; the liquid chlorine vaporizer should be treated with hot water, but the steel cylinders do not need to be sprayed with hot water.\"
3# apzh27 Do you know what the temperature is? It can be sprayed with hot water below 35 degrees; I think the purpose is to preheat it
The pressure in the cylinder must be higher than the vaporization pressure.
I would like to ask what procedures need to be followed before using a new liquid chlorine cylinder?
What should I do if the valve of a liquid chlorine cylinder is corroded?
Some specifications state that gas cylinders can be used with hot water at around 40 degrees Celsius. .