Urgent! ! ! ! How should the mesh size of the filter element inside the filter be chosen?

Thread Content

This post was last edited by wang1981 on 2010-4-15 08:23. The client only provided data on the filter media, but not the mesh size of the filter screens. Does anyone know what mesh size is required for the following cases? 1. Catalyst size: strip-shaped, φ2~2.5×10mm; Temperature: 80°C; Pressure: 1.73 Mpa; Viscosity (cp): 0.326; Density: 795.7 m3/h; Flow rate: 55001.8 kg/h. Required filter screen mesh size: F2. 2. Media: acetic acid, SBA, butane. Catalyst size: strip-shaped, φ2~2.5×10mm; Temperature: 80°C; Pressure: 1.5 Mpa; Viscosity (cp): 0.304; Density: 774.2 m3/h; Flow rate: 59690.2 kg/h. Required filter screen mesh size: … 3. Media: acetic acid, SBA, butane. Catalyst size: strip-shaped, φ2~2.5×10mm; Temperature: 80°C; Pressure: 2.18 Mpa; Viscosity (cp): 0.302; Density: 773 m3/h; Flow rate: 38798 kg/h. Required filter screen mesh size: … 4. Media: acetic acid; Temperature: 141°C; Pressure: 0.1 Mpa; Viscosity (cp): 0.321; Density: 910 m3/h; Flow rate: 11542 kg/h. What should be the mesh size for these four scenarios? I urgently need help from the users on Haichuan. Thank you! ! ! ! !