Talk about the use and configuration of wind vanes
Thread Content
Hello everyone. Wind vane devices are required for all production units. Could you please share your opinions on which type of wind vane offers the best overall performance? Where is the best place to install it? How many units are appropriate to install? What are the requirements?
We used trumpet-shaped red silk cloth with yellow rings, which were placed at the four corners of the roof of the building
Our wind vane is shaped like a Q made of rebar; it is welded in the lower part at the center of the bearing, and a clamp is installed outside the bearing to connect a section of steel pipe, which is used to fix it to other buildings. Our wind vane is a conical tube. Red and white fluorescent ； One unit is installed at the highest point of the device, at the air intake area, in a location that is easily visible and convenient for observation ；
Our device uses an arrow-shaped vane mounted horizontally on a vertical pole, with a metal tip at the front and a metal plate at the back. I’ve observed that it keeps swaying constantly, making it difficult for me to determine the actual direction of the wind (especially when the wind is not strong). It is installed in the areas surrounding the device, in regions where the hydrogen sulfide concentration is high. It’s still easier for me to determine the wind direction by observing the movement of steam or red flags. I think the one on the second floor is better.