Urea conversion rate in the triamine reactor
Thread Content
What are the conversion rates of urea in triamine reactors using low-pressure and atmospheric-pressure methods?
Around 90%, with highs of 93% and lows of 82%. Generally, it is calculated based on urea consumption; the theoretical amount required is 2.86 tons, which is then divided by the actual amount of urea used
The urea conversion rate in the triamine reactor using the low-pressure and atmospheric-pressure methods should refer to the single-pass conversion rate.
This post was last edited by lxq700918 on 2010-4-28 08:59. Here, the figure is around 95%, with a typical consumption of about 2950 kg of triamine per ton
What was said on the third floor is correct; it refers to the one-way urea conversion rate.